Payment & Shipping Terms:
|Product Name:||Accurl Cnc Fiber Laser Cutting Machine / IP54 Tube Laser Cutter||Min.line Width:||0.1mm|
|Repeating Accuracy::||+-0.03mm||Operating Temperature::||0°C-45°C|
|Cooling Mode:||Water Cooling||Laser Source:||Chinese Or Imported|
|Voltage::||AC380V±10% 50HZ(60HZ)||Cutting Area:||ø40-ø200 X 6000mm|
Fiber Laser Cutting Machine For Tube, Fiber Tube Laser Cutting Machine
Introduction of laser cutting machine:
Accurl fiber laser cutting machine is equipped with fiber laser which is energy-efficient, environment-friendly as well as highly efficient.
Recently, fiber laser medium is the most popular and stable laser source internationally. The laser beam of high energy density is focused on the surface of the material. Then the area melts, burns, vaporizes away, and the slag is blown away by a jet of gas, leaving a smooth seam with a high-quality surface finish made by a relative motion between laser light beam and preset routine for the material. That is to say, the automatic laser cutting can be realized when moving the light spot position by the mechanical systems controlled by CNC. KJG fiber laser cutting machine is high-tech equipment integrated with laser technology, CNC technology and mechanical technology.
1) The Accurl laser cutting machine with the highest precision in China, it can cut small metal bike design with size of half a coin and perfectly cut 6mm mild steel,120 holes can be cut within one minute.
2) 600℃ heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, accurate CO2 protection welding, to make sure 20 years usage without deformation.
3) Using laser electrical cabinet integration design, cover small area , save space, minimalist design.
4) Scrap car symmetrical design, both sides can clean up the waste; Put machine to the romm has no left and right requirements; Pneumatic lifter device to prevent the material from scratching.
5) Specially used for cutting 0.5-6mm carbon steel, 0.5-5mm stainless steel, galvanized steel, electrolytic zinc-coated steel sheet, silicon steel and other kinds of thin metal sheets.1000W can cut 3mm aluminum and 2mm copper.
|Laser source medium||Fiber|
|Cutting range (L * W)||ø40-ø200 x 6000mm|
|Z axle stroke||250 mm|
|Max. positioning speed||120 m/min|
|X,Y axle Max. accelerate speed||1.0G|
|Cooling form||Water cooling|
Output power of laser source
500W/1000W / 1500W / 2000W
2500W / 3000W / 4000W
|Min. cutting gap||≤ 0.1 mm|
|Positioning accuracy of X, Y and Z axles||± 0.03 mm|
|Repeated positioning accuracy of X, Y and Z axles||± 0.01 mm|
|Thickness of cutting material (according to material)||0.2 - 25 mm|
|Driver model||Imported servo motor|
|Power requirement||380V, 50/60 Hz|
|Continuous working time||24 Hours|
|Machine weight||About 4000 Kgs|
|Total protection level of power supply||IP54|
|Laser Power||Max cutting thickness|
|Carbon steel(mm)||Stainless steel(mm)||Aluminum (mm)||
|Above parameter for reference only|
Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, electrical
equipment, lighting, posters, auto parts, display equipment, hardware and metal processing.
Name:AC servo motor & driver
The imported servo motor (Y-axis driven by two servo motors) along with the sophisticated planetary reducer ensures steady, precise and reliable drive.
Name:Precision Linear Guides
Advanced cutting system, laser power and servo movement suit each other perfectly, imported high precision gear and rack drive system, exchangeable double work table, to ensure higher processing speed and accuracy..
The contactless cutting head has the function of auto height tracking and anti-collision, which greatly improves cutting speed, smoothness and cutting accuracy under the same output power. In a word, the cutting efficiency can be increased.
Fast speed,high precision cutting line, and smooth cutting edge
After-sales service, from training to machine installation (3 ways):
1.Training video and user's manual in English to be offered for installation, operation, maintenance and trouble-shooting, and technical guide to be offered by e-mail, fax, telephone/whatsapp /skype//and so on, when you meet some problems of installation, using or adjusting.
2.Your company can arrange technologist come our factory to learn basic knowledge of equipment and operating essentials , sufficient training time about 3-5days , the training content is as follows:
a) Common drawing software training ;
b) Machine on and off training procedures ;
c) The significance of control panel and software parameters, parameters range’s setting
d) Basic cleaning and maintenance of the machine ;
e) Common Hardware Troubleshooting ;
f) Caution of operation.
3.Door-to-door instruction training service. visa, traveling expenses and accommodation will be at customer's cost. It's better to arrange a translator for both of our engineers during the training period. Training Time: 3-5days.
a).1Year for the whole machine(Man-made Damage is negotiated.).
b).Laser source 2 Years warranty
c).Lifelong maintenance and spare parts supply
d).Free training for operation staffs. (engineer can go abroad is negotiated.)
Taiyi Laser is a high-tech machinery and equipment manufacturer specializing on the research, development, production,and sales service. Brand Taiyi was established in the 1980s in Taiwan and manufactured pneumatic tapping machine andelectrical tapping machine at the beginning. With the company's development, Taiyi started to manufacture laser equipment, including laser marking machine, laser welding machine and laser cutting machine, with over 100 products available. Dongguan factory covers an area of 8000m2. It islocated in the famous manufacturing city of China and radiates to the PRD.Hubei manufacturing base covers an area of 30 acres. Relying on the superiority of the talent and technique, Taiyi isprofessional from product development, processing, production, assembling to one-stop shipping,having established a goodstrategic partnership with Optical Valley of China and Huazhong University of Science and Technology. For better service from pre-sales and after-sales, Taiyi has set up offices in China and overseas. East China (Kunshan) Office, South China (Dongguan factory), West (Chongqing), North China (Beijing), Central China (Hubei base) and ZhejiangOffice (planning); Service Stations are also available Overseas: Thailand, Turkey, India, Israel, Iran, Switzerland, Poland, SouthKorea, Egypt, Algeria, Sri Lanka, Vietnam.Welcome to join Taiyi family. in making contributions to the world.