|
Product Details:
|
| Product Name: | Fiber Laser Marking Machine | Laser Power: | 20W 30W 50W Optional |
|---|---|---|---|
| Laser Source: | Raycus Max IPG JPT Optional | Control Software: | EZCAD |
| Warranty: | 2 Years | Marking Speed: | 7000mm/s |
| Laser Wavelength: | 1064nm | Applicable Material: | Metal And 80% Plastic |
| Lifespan Of Laser Device: | 100,000 Hours | Power Supply: | AC220V 50HZ/60HZ |
| After-sales Service: | Can Provide Overseas Services | ||
| High Light: | 30W Optical Fiber Laser Marking Machine,20W Optical Fiber Laser Marking Machine,1064nm Fiber Optic Laser Engraver |
||
| Laser power | 20W 30W |
| Laser source | Raycus |
| Control board | BJJCZ |
| Control software | JCZ Ezcad |
| Laser lifespan | 100,000 hours |
| Laser beam | 1064nm |
| Optical quality | m2≤2 |
| Repeat frequency | 20khz-100khz |
| Marking speed | ≤7000mm/s |
| Marking range | 110mm*110mm standard (optional) |
| Min.Line | 0.01mm |
| Repeat precision | ±0.003mm |
| Power consumption | ≤800w |
| Voltage | AC220V 50Hz |
| Cooling mode | Air cooling |
| Supported characters | Any fonts downloaded on computer |
| Supported format | DWG,DFX,BMP,JPG,PNG,TIF,PCX, TAG, GIF, PLT etc.. |
| Supported Bar code | CODE39, EAN, CODE128, Data Matrix, PDF417 etc.. |
1. All metals: gold, silver, titanium, copper, alloy, aluminum, steel, manganese steel, magnesium, zinc, stainless steel, carbon steel / mild steel, all kinds of alloy steel, electrolytic plate, brass plate, galvanized sheet , Aluminum, all kinds of alloy plates, all kinds of sheet metal, rare metals, coated metal, anodized aluminum and other special surface treatment, electroplating the surface of the aluminum-magnesium alloy surface oxygen decomposition
2. Non-metallic: non-metallic coating materials, industrial plastics, hard plastics, rubber, ceramics, resins, cartons, leather, clothes , wood, paper, plexiglass, epoxy resin, acrylic resin, unsaturated polyester resin material
The optical fiber laser marking machine USES the laser beam to mark the surface of various substances permanently. The marking effect is to show the deep material through the evaporation of the surface material, or to "carve" the trace through the chemical and physical changes of the surface material caused by the light, or to burn part of the material by the light, showing all kinds of patterns, characters, barcodes and other graphics that need to be etched.
Contact Person: Coco
Tel: +86 13377773809
